Bluelab Dosetronic Perodoser Banner
  Back to Hydrostation Accessories

How does the Bluelab Dosetronic Controller work?

The Dosetronic provides continuous control of the desired levels of nutrient and temperature. All you do is program the required levels of conductivity, pH and temperature as the crop progresses through each growing phase. You retain control and the Dosetronic backs you up! This enables fast and accurate alterations to the feed system as the needs of the crop change.

The Dosetronic can be used for a wide range of applications including Hydroponics, Horticulture, Agriculture,

Floriculture and Aquaculture and is ideally suited for re-circulating hydroponic NFT systems.

Automated and accurate nutrient control

The Dosetronic provides continuous control of conductivity and pH levels of a solution by adding fertiliser and pH corrector into your mixing tank via peristaltic pumps or solenoids.


Bluelab Dosetronic Peridoser £1790.00

Bluelab Dosetronic

Bluelab Dosetronic Peridoser Kit

Bluelab Peridoser Set Up

Simply program the controller with the conductivity and pH values that you want your system to run at and tailor the dosing intervals to suit the size of your mixing tank. The Dosetronic will then take care of the hard work for you.

By using high performance conductivity and pH probes, the Dosetronic will intelligently control the strength of your re-circulating solution to a high level of accuracy. When it detects that the conductivity or pH levels have fallen outside of your pre-programmed set points, the Dosetronic will automatically trigger the dosing of more nutrient or pH corrector until those levels have stabilised.

The job of the Bluelab Dosetronic does not stop there. It will tirelessly control your system 24 hours a day, 7 days a week, 12 months a year.

Solution or air temperature control

The innovative design of the Dosetronic means you can choose to control either the nutrient solution temperature, or the air temperature, depending on which is more critical to your growing environment.

All you do is select the heating or cooling equipment required to control the temperature of the air or solution, program in the temperature settings you require, and plug the equipment into the controller. You then place the temperature probe (supplied with the Dosetronic) where control is required.

The Dosetronic has proven itself in the hydroponic market worldwide for over 20 years and has earned itself an international reputation for excellence. This is why so many commercial growers are using the Bluelab Dosetronic to save time, money and improve accuracy.

It is one of the most simple, robust and reliable controllers in its class!

Bluelab Peridoser Set Up

Back to Hydrostation Accessories